One mans trash...

It amazes me what people throw away! Just a couple of weeks ago Q happened upon a little wooden desk for me to restore. It would seem he has a bit of an eye for these things as last weekend he spotted this chair on the side of the road.

 It seemed to me to be a perfectly good chair, sitting all alone on the side of the road, with a bright future full of chair like activities ahead of it. Quick as a flash we whisked it into the boot of the car; this would complete my dining set of mismatched chairs perfectly!

While I’ve found out the hard way that the majority of chairs that are put out as rubbish are beyond rescue, all that this particular chair needed was a little bit of wood glue and a hammer.

10 minutes of gluing, hammering and a good dash of brute force, the transformation was complete.

Over the last two years I have been collecting mismatched chairs to go with the timber dining table I found on Ebay. Using some Pinterest inspiration, I want to paint the table white to match my restored cabinet and side table. I have always loved mismatched chairs that are painted in the one colour to tie them all together, so I am planning on painting them all an antique blue/teal. I can’t wait to show you the finished project!

The Humble Garage Sale

Against my better judgement I decided to have a garage sale. I’ve never been a fan of them, having vivid memories from when I was young of people knocking at our door at 5am in the morning looking to scoop up a bargain. Having learnt from that, I kept my street number a mystery until the morning of the sale. Admittedly, I was rather dubious, imagining if I didn’t want this junk, why would anyone else? But the lure of my new found love of decluttering, and some extra cash was too much.

My mum and Q also decided to contribute various treasures to the sale. We had some strict rules to make sure we didn’t end up with more than when we started. We were not allowed to buy or swap each others stuff. That punch bowl in my cabinet, that’s always been there, I swear!

So bleary eyed, we gathered on my lawn on a Saturday morning in February, where we dragged out table after table of junk, ah I mean quality used goods. I would really love to tell you that it was a huge success, an excellent way to find new homes for the things you no longer want, and an effective use of a precious Saturday morning. However I’m a terrible liar and I don’t think you would believe me! Between the three of us we made just over $170 that morning, and my share of the loot was a grand total of $27.25. About half of the leftover items went out for my suburbs kerbside collection. Suddenly the items that we had been asking just a couple of dollars for became far more appealing when they were free. The remainder of the items were loaded into the car and taken immediately to the local op shop for donation.

While we didn’t make a lot of money, the act of setting a deadline and agreeing that nothing was allowed to return to my garage afterwards was an excellent way of decluttering. I have regained the use of my garage as well as the storage room under my house. To let go of all the things and regain some space felt good, and the effort required will make us all think twice every time we make a purchase now. I think a lot more consideration will go into any item I’m thinking of buying and bringing into my home. I will ask myself questions like ‘do I really need this’, ‘will I use it’, ‘will I love it’  and ‘how long will this last in my life’.

So at the end of the day, the humble garage sale helped me take some big steps forward on my path to a simple, more minimalist home. In future, if I decide to part with something I will either donate it, or use EBay or Gumtree to sell it. The highlight of the day was the discovery that Q made on the side of the road. A cute little wooden desk that already had it’s paint stripped off and was just begging for a restoration. I will be blogging about this project in a couple of weeks so watch this space!

I would love to hear from you - what are your experiences holding a garage sale or rehoming those things you no longer want to need. Do you think the garage sale is a thing of the past, what is the best way to get rid of things today?

Cabinet Restoration - A Labour of Love

I stumbled across this old cabinet while exploring a milking shed on my parents’ farm. It was beaten up, covered in cow poo, and looked like it was destined for the dump, but for me it was love at first sight. I wanted to take it home, pretty it up with a lick of paint and some wallpaper, and fill it with tea cups and wine glasses and my good china (I don’t actually have good china, but I thought having a cabinet to keep it in would be an excellent reason to get some).

How hard can it be I thought? I just need some sandpaper, paint, a weekend and a helper. My bestie K seemed up to the task. Like me she could see beyond the poo covered exterior to something beautiful beneath. It was decided then, we would have a fun weekend restoration project to amuse us, just as soon as we found the time…

Weeks became months. K decided to give away most of her worldly possession and move to Scotland. Every time I parked my car in the garage there was the cabinet, staring at me accusingly with its grubby yellow face, glass bubble eyes and flaking red nose. It seemed destined to sit there forever. Enter Q, an everyday MacGyver who is a wiz with a nail and hammer. With neither of us realising the full extent of the project, he agreed to help me restore the cabinet to its former glory.

While I love the finished piece, I don’t want you to be under any illusions, there was a lot of work invested in this project, and a lot of unplanned trips to Bunnings. However, it was an excellent couples building exercise (read challenging) and has given me a wonderful sense of achievement. I feel confident enough to tackle the many other furniture restoration projects I’ve currently got on my ever growing to do list. 

The Three P's of Restoration: Preperation, Preperation, Preperation 

The first step involved completely dismantling the cabinet. We soon discovered that not only was the back of the cabinet damaged beyond repair, the shelves would need to be ripped out and replaced too.  The most time consuming part of the process was removing all the nails and undoing the screws holding on the hinges and catches. For some reason, perhaps to save time, each hinge was attached with one screw and one nail which made them extra challenging to remove.    

Next the sanding! This took two full afternoons to do. We took the paint back to its original coat with a random orbital sander (I really want one of these for my birthday!) This was a messy job which we did in the front yard, and left us covered in yellow paint dust, while sporting dust masks, safety goggles and ear plugs. We used quite a fine grit sandpaper so not to damage the wood. 

I was excited because I was sure it was finally time to paint now, and really we were almost finished then weren’t we? But no, first we had to fill all the cracks, chips and flaws with acrylic wood filler, as well as sanding the edges and corners and tricky bits by hand. We also had to cut the new shelves to size which we measured using the original shelves.

I originally envisioned the cabinet with white gloss paint, blue trim, and white and blue wallpaper lining the inside. However first we wanted to cover it in two coats of white primer. We used Zinnser B-I-N white pigmented paint which contains shellac and provides good coverage on wood. We applied it with brushes and it gave a nice white antique effect. We liked it so much that we decided to do a final coat with this instead of gloss paint, as we didn’t want it to look too ‘new’. 

 

Finishing Touches

I’m a little ashamed to say that we went on a bit of a hiatus after this. Getting to this point had taken five full afternoons of about 6 hours each over our Christmas break. However on and off over the next six weeks we chipped away at it slowly, fitting the shelves, attaching the doors, fitting the beautiful catches and installing the newly cut glass. A final paint touch up and it was finally ready to heft upstairs! This was nerve wracking, after weeks of work I had images of my beautiful cabinet tumbling down the front stairs, however we installed it in the kitchen with no incidents. Then late on that Sunday night we cut and pasted the wallpaper onto the back board (wallpaper is not fun to work with, I need to remember this). At last at 9.30pm that night (big apologies to my housemate) we nailed the back on. 

There you have it! How to restore a cabinet in just six easy weeks. In case you want to take on a similar project of your own, I have included  a list of all the materials and tools you will need. If you are considering restoring a piece of furniture I would recommend closely examining it for mould, water damage, any spills or stains, large cracks or warps in the wood. While restoring a piece of furniture is immensely satisfying, starting off with a piece which is structurally sound will make the whole process a lot easier and more enjoyable!  

I would love to hear of others experiences with restoration projects! Are there any tips or advice you can share, or anything you wouldn't tackle again?

The Finer Details 

Materials (all materials from Bunnings unless otherwise noted):

·        2 x 1L Zinnser B-I-N white shellac paint

·        House of York 'Pugin' wallpaper (Masters)

·        Shur-Stik wallpaper paste ( Masters)

·        3mm clear glass, unfinished edges (Archer Glass)

·        Sandpaper sheets x 5 (100-120 grit)

·        Sander pads x 15 (100-120 grit)

·        Bullet head nails 

·        Screws

·        Hinges

·        Reproduction cabinet catches (Ebay)

·        Acrylic wood sandable filler (white)

·        4mm MDF backing board

·        4mm marine plywood as shelves

·        8mm x 8mm square timber molding to hold in glass

·        3M ‘blue’ removable masking tape

·        PVA aquadhere wood glue

·        Acrylic gap filler (caulk for window glass)

·        Methylated spirits

·        Chux cloths

·        Paint pots  

Tools:

·        Claw Hammer

·        Assortment of screwdrivers

·        Chisel

·        Paint scraper / filler application blade

·        Razor blade holder to clean glass

·        125 mm random orbital sander

·        Tape measure

·        Saw

·        Assortment of G-clamps

·        Scrap timber to prevent damage during clamping

·        Pliers

·        Battery powered drill

·        4 x paintbrushes

·        Saw horses / tressels

·        Set square

·        Long ruler or straight edge